Slab–mantle flow interaction: influence on subduction dynamics and duration     

Juan Rodríguez‐González  Ana M. Negredo  Eugenio Carminati 《地学学报》2014,26(4):265-272

We investigate the influence of mantle flow relative to the lithosphere on subduction dynamics. We use 2D thermo‐mechanical models assuming incompressible non‐Newtonian fluid rheology. Different mantle flow velocities consistent with absolute plate motion models are tested, as well as both directions of flow, either sustaining or opposing slab dip. The effects of different inflow/outflow velocity profiles, slab strengths and upper–lower mantle viscosity contrasts are also evaluated. Slab dip deviations between models with opposite mantle flow directions range from 37° for relatively strong slabs (η_max = 10²⁵ Pa s) to 50° for weaker slabs (η_max = 10²⁴ Pa s), accounting for a significant amount of natural slab dip variability. For imposed mantle flow supporting the slab, the initial stage of slab steepening is followed by a stage of continuous slab dip decrease. This slab shallowing eventually leads to mantle wedge closure, subduction cessation and slab break‐off, possibly driving subduction flips.  相似文献   

A stress and displacement discontinuity element method for elastic transversely anisotropic rock     

A. Bobet  V. García Marín 《国际地质力学数值与分析法杂志》2014,38(18):1898-1922

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Frasnian–Famennian crisis in the Malaguide Complex (Betic Cordillera,Spain)     

Rosario Rodríguez‐Cañero  Agustín Martín‐Algarra 《地学学报》2014,26(1):38-54

Devonian sediments of the Malaguide Complex potentially could include the Frasnian–Famennian boundary, one of the five greatest Phanerozoic biotic crises. Conodont biofacies and microfacies of carbonate clasts from a pebbly mudstone underlying Tournaisian radiolarites allows identification, for the first time in the Malaguide Complex, of Devonian shallow marine environments laterally grading to deeper realms. The clasts yielded Frasnian conodont associations of the falsiovalis to rhenana biozones, with six biofacies that reveal different environmental conditions in their source areas. Source sediments were dismantled and redeposited within the pebbly mudstone, whose origin is tentatively related to one of the events that are associated worldwide with the Frasnian–Famennian crisis. The latter is recorded, in two equivalent Malaguide pelagic successions, by stratigraphic discontinuities, and it was, probably, tectonically and/or eustatically controlled, as in other Alpine‐Mediterranean Paleotethyan margins.  相似文献   

Ranking of Placer Gold Prospects in Chile Through Analytic Hierarchy Process     

Jara  J. Joaquín  Moreno  Francisco  Jara  Raúl  Dubournais  Francisco  Mata  Rodrigo  Peters  David  Marquardt  Carlos  Lagos  Gustavo 《Natural Resources Research》2019,28(3):813-832

Chile has a rich, but poorly known history of placer gold mining. At present, this sector is almost nonexistent and there are some restrictions for its revival: disperse and partial information on existing resources and limited technical expertise to assess the potential of placer gold mine sites. This paper presents the background, methodology and results of the prioritization process of known prospects of this kind in Chile. This research was part of a publicly funded project aimed to incentivize the development of this industry. The ranking was carried out using the analytic hierarchy process, which allowed to include different quantitative and qualitative variables related to the economic potential, technical aspects, contextual viability and socioeconomic factors in the analysis. The results show that, despite the increasing relevance of environmental and community issues in mining development, the business potential and the economic/technical aspects are the main factors in the early selection of a site to advance in exploration and development activities. Both variables represented around 40% and 37% of weights in the final selection, respectively. In contrast, contextual viability and local socioeconomic impacts only accounted for the remaining 23%. This study also shows that the inclusion of experts with different backgrounds in the process enriches the analysis and does not significantly distort the final outcome of the prioritization. Finally, the relevance of using MCDM tools when assessing the attractiveness of mine sites for their development is highlighted, particularly when public funds for subsequent exploration activities are committed.

  相似文献   

Late Miocene evaporite geochemistry of Lorca and Fortuna basins (Eastern Betics,SE Spain): Evidence of restriction and continentalization     

Javier García-Veigas  Luis Gibert  Dioni I. Cendón  David Artiaga  Hugo Corbí  Jesús M. Soria  Tim K. Lowenstein  Enrique Sanz 《Basin Research》2020,32(5):916-948

The Lorca and Fortuna basins are two intramontane Neogene basins located in the eastern Betic Cordillera (SE Spain). During the Late Tortonian—Early Messinian, marine and continental evaporites precipitated in these basins as a consequence of increased marine restriction and isolation. Here we show a stratigraphic correlation between the evaporite records of these basins based on geochemical indicators. We use SO₄ isotope compositions and Sr isotopic ratios in gypsum, and halite Br contents to characterize these units and to identify the marine or continental source of the waters feeding the evaporite basins. In addition, we review the available chronological information used to date these evaporites in Lorca (La Serrata Fm), including a thick saline deposit, that we correlate with the First Evaporitic Group in Fortuna (Los Baños Fm). This correlation is also supported by micropalaeontological data, giving a Late Tortonian age for this sequence. The Second Evaporitic Group, (Chicamo Fm), and the Third Evaporitic Group (Rambla Salada Fm) developed only in Fortuna during the Messinian. According to the palaeogeographical scheme presented here, the evaporites of the Lorca and Fortuna basins were formed during the Late Tortonian—Early Messinian, close to the Betic Seaway closure. Sulphate isotope compositions and Sr isotopic ratios of the Ribera Gypsum Mb, at the base of the Rambla Salada Fm (Fortuna basin), match those of the Late Messinian selenite gypsum beds in San Miguel de Salinas, in the near Bajo Segura basin (40 km to the East), and other Messinian Salinity Crisis gypsum deposits in the Mediterranean. According to these geochemical indicators and the uncertainty of the chronology of this unit, the assignment of the Rambla Salada Fm to the MSC cannot be ruled out.  相似文献   

Mercury cycling during acid rain recovery at the forested Lesní potok catchment,Czech Republic     

Tomáš Navrátil  James B. Shanley  Jan Rohovec  Irena Dobešová  Šárka Matoušková  Michal Roll  Tereza Nováková  Filip Oulehle 《水文研究》2021,35(6):e14255

From 2011 to 2019, mercury (Hg) stores and fluxes were studied in the small forested catchment Lesní potok (LES) in the central Czech Republic using the watershed mass balance approach together with internal measurements. Mean input fluxes of Hg via open bulk deposition, beech throughfall and spruce throughfall during the periodwere 2.9, 3.9 and 7.6 μg m⁻² year⁻¹, respectively. These values were considerably lower than corresponding deposition Hg fluxes reported in the early years of the 21st century from catchments in Germany. Current bulk precipitation inputs at unimpacted Czech mountainous sites were lower than those in Germany. The largest Hg inputs to the catchment were via litterfall, averaging 22.6 and 17.8 μg m⁻² year⁻¹ for beech and spruce stands. The average Hg input, based on the sum of mean litterfall and throughfall deposition, was 23.0 μg m⁻² year⁻¹, compared to the estimated Hg output in runoff of 0.5 μg m⁻² year⁻¹, which is low compared to other reported values. Thus, only ~2% of Hg input is exported in stream runoff. Stream water Hg was only weakly related to dissolved organic carbon (DOC) but both concentrations were positively correlated with water temperature. The estimated total soil Hg pool averaged 47.5 mg m⁻², only 4% of which was in the O-horizon. Thus Hg in the O-horizon pool represents 72 years of deposition at the current input flux and 3800 years of export at the current runoff flux. Age-dating by ¹⁴C suggested that organic soil contains Hg from recent deposition, while mineral soil at 40–80 cm depth contained 4400-year old carbon, suggesting the soil had accumulated atmospheric Hg inputs through millennia to reach the highest soil Hg pool of the soil profile. These findings suggest that industrial era intensification of the Hg cycle is superimposed on a slower-paced Hg cycle during most of the Holocene.  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Visibility of Prominences Using the He <Emphasis Type="SmallCaps">i</Emphasis> D<Subscript>3</Subscript> Line Filter on the PROBA-3/ASPIICS Coronagraph     

S. Jejčič  P. Heinzel  N. Labrosse  A. N. Zhukov  A. Bemporad  S. Fineschi  S. Gunár 《Solar physics》2018,293(2):33

We determine the optimal width and shape of the narrow-band filter centered on the He?i D₃ line for prominence and coronal mass ejection (CME) observations with the ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun) coronagraph onboard the PROBA-3 (Project for On-board Autonomy) satellite, to be launched in 2020. We analyze He?i D₃ line intensities for three representative non-local thermal equilibrium prominence models at temperatures 8, 30, and 100 kK computed with a radiative transfer code and the prominence visible-light (VL) emission due to Thomson scattering on the prominence electrons. We compute various useful relations at prominence line-of-sight velocities of 0, 100, and 300 km?s^?1 for 20 Å wide flat filter and three Gaussian filters with a full-width at half-maximum (FWHM) equal to 5, 10, and 20 Å to show the relative brightness contribution of the He?i D₃ line and the prominence VL to the visibility in a given narrow-band filter. We also discuss possible signal contamination by Na?i D₁ and D₂ lines, which otherwise may be useful to detect comets. Our results mainly show that i) an optimal narrow-band filter should be flat or somewhere between flat and Gaussian with an FWHM of 20 Å in order to detect fast-moving prominence structures, ii) the maximum emission in the He?i D₃ line is at 30 kK and the minimal at 100 kK, and iii) the ratio of emission in the He?i D₃ line to the VL emission can provide a useful diagnostic for the temperature of prominence structures. This ratio is up to 10 for hot prominence structures, up to 100 for cool structures, and up to 1000 for warm structures.  相似文献   

Spatially distributed tracer‐aided modelling to explore water and isotope transport,storage and mixing in a pristine,humid tropical catchment          下载免费PDF全文

Joni Dehaspe  Christian Birkel  Doerthe Tetzlaff  Ricardo Sánchez‐Murillo  Ana María Durán‐Quesada  Chris Soulsby 《水文研究》2018,32(21):3206-3224

Rapidly transforming headwater catchments in the humid tropics provide important resources for drinking water, irrigation, hydropower, and ecosystem connectivity. However, such resources for downstream use remain unstudied. To improve understanding of the behaviour and influence of pristine rainforests on water and tracer fluxes, we adapted the relatively parsimonious, spatially distributed tracer‐aided rainfall–runoff (STARR) model using event‐based stable isotope data for the 3.2‐km² San Lorencito catchment in Costa Rica. STARR was used to simulate rainforest interception of water and stable isotopes, which showed a significant isotopic enrichment in throughfall compared with gross rainfall. Acceptable concurrent simulations of discharge (Kling–Gupta efficiency [KGE] ~0.8) and stable isotopes in stream water (KGE ~0.6) at high spatial (10 m) and temporal (hourly) resolution indicated a rapidly responding system. Around 90% of average annual streamflow (2,099 mm) was composed of quick, near‐surface runoff components, whereas only ~10% originated from groundwater in deeper layers. Simulated actual evapotranspiration (ET) from interception and soil storage were low (~420 mm/year) due to high relative humidity (average 96%) and cloud cover limiting radiation inputs. Modelling suggested a highly variable groundwater storage (~10 to 500 mm) in this steep, fractured volcanic catchment that sustains dry season baseflows. This groundwater is concentrated in riparian areas as an alluvial–colluvial aquifer connected to the stream. This was supported by rainfall–runoff isotope simulations, showing a “flashy” stream response to rainfall with only a moderate damping effect and a constant isotope signature from deeper groundwater (~400‐mm additional mixing volume) during baseflow. The work serves as a first attempt to apply a spatially distributed tracer‐aided model to a tropical rainforest environment exploring the hydrological functioning of a steep, fractured‐volcanic catchment. We also highlight limitations and propose a roadmap for future data collection and spatially distributed tracer‐aided model development in tropical headwater catchments.  相似文献   

Do mixing models with different input requirement yield similar streamflow source contributions? Case study: A tropical montane catchment     

Jorge Ramón  Alicia Correa  Edison Timbe  Giovanny M. Mosquera  Enma Mora  Patricio Crespo 《水文研究》2021,35(6):e14209

Hydrogeochemical based mixing models have been successfully used to investigate the composition and source identification of streamflow. The applicability of these models is limited due to the high costs associated with data collection and the hydrogeochemical analysis of water samples. Fortunately, a variety of mixing models exist, requiting different amount of data as input, and in data scarce regions it is likely that preference will be given to models with the lowest requirement of input data. An unanswered question is if models with high or low input requirement are equally accurate. To this end, the performance of two mixing models with different input requirement, the mixing model analysis (MMA) and the end-member mixing analysis (EMMA), were verified on a tropical montane headwater catchment (21.7 km²) in the Ecuadorian Andes. Nineteen hydrogeochemical tracers were measured on water samples collected weekly during 3 years in streamflow and eight potential water sources or end-members (precipitation, lake water, soil water from different horizons and springs). Results based on 6 conservative tracers, revealed that EMMA (using all tracers) and MMA (using pair-combinations out of the 6 conservative ones), identified the same end-members: rainfall, soil water and spring water., as well as, similar contribution fractions to streamflow from rainfall 21.9% and 21.4%, soil water 52.7% and 52.3%, and spring water 26.1% and 28.7%, respectively. Our findings show that a hydrogeochemical mixing model requiring a few tracers can provide similar outcomes than models demanding more tracers as input data. This underlines the value of a preliminary detailed hydrogeochemical characterization as basis to derive the most cost-efficient monitoring strategy.  相似文献